Being an HP printer user means you have encountered HP Printer in Error State many times. Among many other printers, “HP printer error state” is the most common and vague one.

As such, there is not any dense reason found for this error to occur. However, there are certain troubleshooting measures to fix this issue.

Here in this article, we will be explaining all those steps so that you can get rid of the “HP printer is in an error state.” and resume the printing services on your printer.

Easy Fixes to get out from HP Printer Error State

Solution 1: Restart your Printer

Give your printer some rest. Sometimes restarting your printer can do wonders. At the same time, you should also check all the wired connections of your printer.

Any loose USB cable can get you to see the “HP printer in error state” message.

To restart the printer, do the following:

Turn off your printer.

Pull out the power cable.

Open the printer cover.

Let the printer cool for at least 10-15 minutes.

Leave the printer in an ideal state during rest time.

Now, close the printer cover, insert the power cable and turn on the printer.

Let the printer do its initial set up job.

Now check the printer status, you will get it back on the job.

Solution 2: Check Paper Loading Tray and Papers

Checking loading tray status is also essential. For any displaced or broken loading tray, your printer can go in the error state.

Also, check if there are enough papers loaded in the paper tray.

Make sure you turn off the printer before starting with diagnosing loading tray thing.

Once you are done with all check up, turn on the printer and check if the error message is gone away.

Move on to the next step, if you still get your Hp printer in error state.

Solution 3: HP Printer Hardware Self-Test

Your Hp printer has an inbuilt function that names printing hardware self-test. Performing this test involves an introspection from printer hardware to check if all hardware is functioning well.

For any error/problem at the hardware end; this test could give you a brief explanation about it.

Do the following to perform an HP printing hardware self-test

Open and close the printer cover at fast speed.

For 5-6 time repeat this process.

This will make your printer to print out pages with lines.

If your printer does not produce any printing; you will get a message for that.

Your screen will display the error message so that you can proceed with fixing that specified error.

Solution 4 : Re-connect Your Printer To A Wi-fi Network

If you are using a wireless Hp printer; you need to connect it to your wireless network to perform. Try to reconnect your printer to the wi-fi connection.

Do the following:

Restart your printer.

Go to settings WiFi network on your printer.

select your WiFi name.

Enter the correct password if asked.

The WiFi connection will take a few seconds to set up.

Move to your system and check if you can access the internet. If yes, that means your printer is back to the job now.

Solution 5: Uninstall and reinstall Printer Driver

Installing the printer driver and other related software could also get you red of “Hp Printer in Error State”.

Go to programs on your computer.

Locate for Hp printer driver.

Right click on it and choose “Uninstall” option.

Click “Yes” to give your consent to start uninstalling process.

No reinstall HP printer driver and connect your printer back to the system.

Removing and adding printer will updated printer drivers will resolve the issues and can get back hp printer from error state.

To confirm its working try giving a new printing command. If it prints; you are done.

If Your Printer not working, then Contact Us. Get expert’s advice to resolve HP printer in error state issues and other problems related to your printer.